See this link for details on how to use
Repowering the UK’s oldest wind farms could boost energy generation by 171%
Wind energy has been identified as having an important role to play in the world’s move towards a low-carbon future. But, due to short-term planning rules, it may not have as big a part as it could in the UK’s own sustainable energy generation.
To date, when most UK wind farms were under development, temporary planning consent of 25 years was granted. Under the terms of this consent, when the two and a half decade period comes to an end, the turbines have to be removed and the land returned to its previous use. Now, a significant number of the country’s wind farms are starting to reach the end of their permission period, 62 wind farms in England, Wales and Scotland are aged 15 and over and 22 of these are more than 20 years old. If existing sites are removed without replacement this could decrease the overall amount of energy generated from UK renewables.
There are other problems too: the government has warned that there is a risk of equipment being abandoned on some of the oldest sites, because some original planning consents failed to specify the removal of all of the infrastructure. In some cases, large equipment and cables do not have to be removed. And in 2015, the government created major planning hurdles for onshore wind farms and ended subsidies. As a result, there has been a 94% drop in applications to build new wind farms in England alone.
But all is not lost. To combat the issue, in July 2018 it was announced that the repowering of existing wind turbines would not be subject to the same planning hurdles as new sites. And our analysis has now confirmed that repowering can massively increase the energy output of the UK’s wind farms.
End of life options
There are three options for wind farms that reach the end of their planning consent. First, they can be decommissioned, the infrastructure removed and the land returned to its previous condition. Another option is for the operational life of the existing turbines to be extended. This involves getting planning permission to keep the turbines in place, usually for another five to 10 years. Or the farm can be repowered, which means old turbines will be replaced by newer ones.
So far, most wind farms that have reached the 25 year limit have been repowered and given a 25-year consent for the new turbines. Or they have had the permission for the original turbines extended, allowing them to continue working for up to 10 additional years. Across Britain, 23 sites have already been repowered and at least three have extended their life, while only two have been decommissioned. Repowering sites has proved to be a great opportunity to increase the energy produced. On average repowering has increased the output of sites by 171%.
The following table shows the potential increase in power (measured in megawatts) from sites repowering in England, Wales and Scotland within the next 10 years. In all, 54 sites are due to come to the end of their life within five years, and 161 more within ten years. This data is based on 23 sites that on average (excluding sites that repowered early for technical reasons) repowered after 18 years of operation. Although not all farms will repower this early, or have the same increase in output, these estimates show that repowering has the potential to greatly boost wind farms’ contribution to UK energy supply. If all 215 sites did repower at this level within the next ten years the energy increase will be enough to power an additional 3.8 million homes.
Repowering doesn’t come without its challenges, however. It can change how a wind farm looks, which is not always popular with the general public. On average, repowering has reduced the number of turbines on a site by 24%, but turbines have got 89.5% taller. This has caused difficulties for local planning authorities when assessing the visual impact of planning applications.
Public opinion and the benefits for local communities that come from repowering should be an important consideration – but this hasn’t played a major part in approval decisions, and the public response to repowering schemes has varied. Some approved schemes – such as St Breock wind farm in Cornwall – have received significant support, while others (Ovenden Moor in West Yorskshire, for example) have come up against local opposition.
Crucially, despite the evident benefits to repowering wind farms, there is still not enough governmental guidance to ensure that decisions can be made quickly and fairly in a way that balances energy production with local environmental, social and economic benefits.
This is not an issue that the country can sit on. With so many wind farms approaching their 25th year, we need to act quickly in order to maximise the potential benefits to energy generation and carbon reduction targets.
Some stunning photographs, and stories here: https://www.britishphotographyawards.org/2019-Shortlist
Voting is closed.
Changes to the script debugging setting coming in a future update:
Need to find a column in a database? The following SQL will return the tables, and columns, that contain a wildcard value
SELECT c.name AS ColumnName, t.name AS TableName FROM sys.columns c JOIN sys.tables t ON c.object_id = t.object_id WHERE c.name LIKE '%column_name%' ORDER BY TableName, ColumnName;
Try this solution, posted as a fix for Windows 7 but worked for me under Windows 10.
This is a quick aid based on the Raspberry Pi documentation.
Some basic commands are:
sudo nginx -s reload sudo nano /etc/nginx/nginx.conf systemctl status nginx.service
Quick post, aide-memoire, for disabling and then re-instating database contraints in MS-SQL.
EXEC sp_MSforeachtable "ALTER TABLE ? NOCHECK CONSTRAINT ALL" EXEC sp_MSforeachtable @command1="PRINT '?'", @command2="ALTER TABLE ? WITH CHECK CHECK CONSTRAINT ALL"
Since I installed the “Windows 10 Fall Creators Update”, build 16299, the desktop has stopped auto-starting, to it’s BIOS configured schedule. It’s scheduled for a 5:01am start, but every morning I’ve come into the room, since the update, it’s sitting there switched off.
A couple of Google’s later and here’s the answer, well I hope it is as I haven’t verified it yet, something for tomorrow morning. So the suggestion is to disable Windows “fast startup” mode, details on doing that can be found over at TechAdvisor.co.uk, and a more detailed explaination of why is at HowToGeek.com.
29th October 2017: Seems to have resolved the issue.